Thrive EVO™
4-Station Wireless Transmitter and Receiver
The Thrive EVO™ is an easy-to-use irrigation controller accessory that should be used when the existing wire path is lost, broken or beyond repair.
The EVO™ is compatible with all multi-wire irrgation controllers which simply converts the 24 VAC station signal into a wireless communication 200+ yards through any obstructions.
No programing. No hassel. No wire.
Leverage the power of your smart controller to manage and save water immediately.
Overview
-
This easy-to-use irrigation controller accessory is compatible with most multi-wire irrigation controllers. It allows you to use any existing or “open” stations by connecting a wire path between the Thrive Transmitter™ and an irrigation controller.
When the irrigation controller sends a signal to a valve, the Thrive Transmitter™ simply sends this message wirelessly 200+ yards away through any obstruction to a Thrive Receiver™. The Receiver can controll up to four (4 qty) valves. Replace the AC solenoid with a DC latching solenoid.
The Thrive Receiver™ is secured to the underside of any rectangular irrigation valve box so that it’s hidden from view and potential vandalism.
No field programming of the EVO™ is needed. Simply use the power and capabilities of your smart irrigation controller to meet local water conservation requirements.
The EVO™ has the capability of being able to operate all four stations at the same time, assuming the irrigation controller has this capability. Patents Pending.
Specifications
-
Electrical Specifications
Thrive Transmitter
Maximum Stations (Zones)
Active Together
4 (Four)
-10°F -- 140°F (-23°C -- 60°C)
Temperature Range
30 VAC
Maximum AC input Voltage
30 VAC
Maximum AC input Voltage
Terminal Black input Voltage
12V - 30V
to register a station (zone)
Thrive Receiver
-10°F -- 140°F (-23°C -- 60°C)
Temperature Range
5.5 VAC
Maximum DC input Voltage
9 VAC
Mechanical Specifications
Thrive Transmitter
1.5lbs (3.3 kg)
Weight
6.6" L x 5" W x 2" T
(165mm L x 127mm W x 51mm T)
Mechanical Dimensions
Thrive Receiver
1.5lbs (3.3 kg)
Weight
6" L x 2" W x 2" T
(165mm L x 102mm W x 51mm T)
Mechanical Dimensions
Antenna Specifications
Internal Entenna, peak gain 1.5 dBi
Thrive Receiver
External Antenna, peak gain 2.1 dBi
Thrive Transmitter
Antenna Specifications
2A6RS-R102
Thrive Receiver FCCID
2A6RS-T101
Thrive Transmitter FCCID
_Page_1.png)
_Page_1.png)
-
Documents
Image Library
-
Features
-
KEY BENEFITS
Patent Pending
The Thrive Receiver™ battery cassette was developed with the contractor in mind. Installation and replacement is a “snap”
The Thrive Receiver™ is housed is a IP67-rated, rugged plastic housing
The Thrive Receiver™ is powered by two (qty), 9-volt lithium batteries that are projected to last 1-1.5 years depending on site conditions and irrigation requirements
The Thrive Transmitter™ is powered by the adjacent irrigation controller’s 24 VAC auxiliary power output
3-year warranty
Multiple devices can be installed on one site or adjacent sites without interference of adjacent devices
Devices come Pre-paired with matching frequencies – no field programming required
The Thrive Receiver™ has a built in failsafe program to prevent overwatering during blackout or connection loss
The Thrive Transmitter™ is housed in a weather-resistant, key-lock entry, rugged plastic enclosure, using a CH751 key
Manage up to 4 new or existing stations
Compatible with most multi-wire irrigation controllers
Reliable and consistent communication 200+ yards away through any obstruction